Connection performance

Free VPN Speed Test: Download, Upload & Ping

Measure download, upload and HTTP timing with real transfers, then compare your connection with and without a VPN.

  • Real HTTP transfers
  • About 3 MB per run
  • Before-and-after comparison
Your check starts here

Measure connection

Measure actual download and upload transfers, HTTP round-trip time, and timing variation. Compare a saved baseline with a second run after connecting your VPN.

Optional: disconnect your VPN, save a baseline, reconnect, then run.

Start here

How to use this tool

Follow these steps to get observations you can interpret and act on.

  1. Prepare a fair comparison

    Pause large downloads and background transfers. Keep the same device and network for both runs.

  2. Save a baseline

    Before connecting your VPN, save a baseline to record your observed address and transfer performance.

  3. Connect and measure again

    Connect your VPN, run the test, then compare the current measurements with the saved baseline. Repeat if network conditions change.

Behind the check

How the VPN speed checker works

The VPN speed test times downloads and uploads between your browser and this application server. It also reports HTTP round-trip time and timing variation, giving you a practical comparison of this particular route.

Transfers use the application server, not invented regional endpoints. Each run uses about 3 MB. Short HTTP transfers are useful comparisons but do not establish your maximum line speed.

Understanding your results

  • Download and upload rates describe the short transfers used by this tool. They are not a guarantee of your maximum internet speed.
  • HTTP round-trip time includes the browser-to-server request path. It is not an ICMP ping or a measurement to every VPN location.
  • Timing variation can change with Wi-Fi congestion, server distance, browser scheduling and other activity. Compare several similar runs.
Know the scope

Privacy & important limitations

  • Each performance run transfers about 3 MB; saving a speed baseline also runs transfers. Keep this in mind on a metered connection.
  • The baseline is held in this page session. The application server sees the IP address used for the test requests.
Interpret the evidence

Measured findings include their source and scope. An unavailable check is never counted as a pass, a threat or a score.

Common questions

Frequently asked questions

Why is this slower than another speed test?

Different test servers, transfer sizes and network routes produce different measurements. Use this tool mainly for consistent before-and-after comparisons.

Can a faster result prove that a VPN is better?

A single run cannot establish overall quality. Compare the same route at similar times and consider stability, latency and your actual applications.